10W dmx512 dimmbares Konstantstrom-LED-Treiber-Netzteil 100mA-450mA

10W dmx512 dimmable  constant current led driver power supply 100ma-450ma

Output constant current programmable 10W DMX512 dimmable led driver Output constant current programmable 10W DMx512 Dimmable LED driver 100ma, 150ma, 200ma, 250ma, 300ma, 350ma, 400ma, 450ma, Built-in active PFC function, PF≥0.95, efficiency up to 76%

  Specification 

  Mechanical Specification   

Input with ULO-126 terminals 3P: Live Wire AC (L), Neutral Wire AC(N)

Output LED SEC with ULO-381 terminals 2P: output Positive (LED+), output negative (LED-). Connected to LED Lamps.

Suggested wire diameter: Input 0.75-2mm²; Output:0.5-2mm². 

Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

  Dimming operation    

DMX512 dimming:

 Input terminal with 3P;  Live Wire(L)  , Neutral Wire (N)  . Note: vacant for middle terminal

 Output terminals with 5P;  LED SEC positive (LED+), LED negative (LED-). Connected to LED light;

 Common anode design 3P for DIM (DMX512) dimming;   

 Please make sure you connect these correctly ,otherwise your product will not work correctly and could be damaged.

 The default address for our DMX LED driver is 001.

 Address settings device:

 Address settings:

① RDM setting address:

Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.   

② NFC setting address:

Die DMX-Adresse kann von einem Mobiltelefon mit NFC-App oder einem NFC-Handgerät (NFC-Lese- und Schreibgerät: NFC-RW) in der Nähe  des NFC-Signalbereichs des DMX512-Treibers gelesen und geschrieben werden .

Einfache Bedienung über das Zurücksetzen der DMX512-Adresse und die Anpassung der Ausgangsspannung über ein Mobiltelefon mit NFC-App oder ein NFC-Handgerät (NFC-Lese- und Schreibgerät: NFC-RW).

  Verwandte Produkte