100-277VAC Konstantspannung Dali-2 dimmbarer LED-Treiber 24V 96W zu verkaufen

100-277VAC Konstantspannung Dali-2 dimmbarer LED-Treiber 24V 96W zu verkaufen

24 V 96 W DALI-2 & PUSH dimmbarer Konstantspannungs-LED-Treiber mit integrierter aktiver PFC-Funktion, Arbeitseffizienz bis zu 90 %. PWM-Ausgabemodus, geeignet für die Installation von intelligenten LED-Beleuchtungsprojekten im Innen- und Außenbereich.

  Spezifikation 

  Mechanische Spezifikation   

※Input & Output wiring 
※Input electronic cable 3*18AWG, the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US);
※Output : 12V electronic cable 5*16AWG to be connected to LED Light;  
          24V electronic cable 5*18AWG to be connected to LED Light;  

※Dimming cable   
※Dimming electronic cable  2*18AWG, Pink DA/N and Purple DA/L (No polar) connected to the DALI BUS when use DALI function.
Pink (N) is connected to AC (N) while Purple (L) and pink (CCT Push )connected to CCT Push dim switch dimmer( L) when use Push function.
※Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
RGBW dimming: electronic cable, Black is output ( V+) Positive, Red (R-), Green(G-), Blue (B-), White(W-) are output (V-) negative

Note:  there is external antenna at output side.  Don't disassemble!

  Dimming operation    

Diagram 1:   DALI-2 dimming with DALI power and dimmer：

Diagram2:  DALI-2 dimming with DALI system and DALI bus：

※Note: For DALI Dimming Wiring Diagram 2, please noted that only one DALI power is need in the DALI bus, so no extra DALI power is needed if the Master or Dimmer already includes the DALI Power. 

  DALI-2 address setting Operation  

※The default address for the DALI-2 LED driver is 001.

※Address settings device:

※Address settings:

① RDM setting address:

Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.   

② NFC setting address:

The DALI-2 led drivers’ address can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers. 

■ Adjust output voltage Operation

※Adjust output voltage slightly for DALI-2 LED drivers

1) The driver output voltage can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DALI-2 LED drivers. 

2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 1.

■ Wie stelle ich die Adresse des DALI-2 CV-LED-Treibers über die NFC-App oder das NFC-Gerät ein?

Einfache Bedienung zum Zurücksetzen der DALI-2-LED-Treiberadresse und Anpassen der Ausgangsspannung über ein Mobiltelefon mit NFC-App  (NFC einstellen)  oder ein NFC-Handheld-Gerät (NFC-Lese- und Schreibgerät : NFC-RW) 

  Verwandte Produkte